Item Infomation


Title: Metallurgical effect on the mechanical behavior of rotary endodontic files using finite element analysis
Authors: Galal, Manar
Issue Date: 2019
Series/Report no.: Bulletin of the National Research Centre, Vol 43:125 (2019)
Abstract: Under bending conditions, the maximum Von Misses stress value was related to NiTi file model (330 MPa), followed by M-wire (311 MPa), then CM file model (191 MPa), while the least amount of stress value was related to R-phase file model (169 MPa). When torsion test was performed the maximum stress value was also related to NiTi file model (270 MPa), followed by M-wire (261 MPa), then CM file model (191 MPa), while the least amount of stress value was related to R-phase file model (188 MPa).
URI: http://tailieuso.tlu.edu.vn/handle/DHTL/10776
Source: https://bnrc.springeropen.com/articles/10.1186/s42269-019-0168-9
ISSN: 2522-8307
Appears in Collections:Tài liệu mở
ABSTRACTS VIEWS

17

VIEWS & DOWNLOAD

0

Files in This Item:
There are no files associated with this item.

Bạn đọc là cán bộ, giáo viên, sinh viên của Trường Đại học Thuỷ Lợi cần đăng nhập để Xem trực tuyến/Tải về



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.