Thông tin tài liệu
Nhan đề : | A comparative finite analysis of the mechanical behavior of ProTaper NEXT and WaveOne rotary files |
Tác giả: | Omar, Nada |
Người tham gia: | Ismail, Amira Galal Galal, Manar Zaazou, Mohamed H. Mohamed, Mohamed Abdullah |
Năm xuất bản : | 2019 |
Số tùng thư/báo cáo: | Bulletin of the National Research Centre, Volume 43 (2019), Article number: 148 |
Tóm tắt : | Finite element analysis was used to evaluate the stress distribution, estimate the residual stresses, bending, and amount of displacement of two nickel-titanium instruments manufactured by the same M-wire technology but with different cross-section. The WaveOne file showed higher torsional stresses accumulation than those accumulated in the ProTaper NEXT. While the ProTaper NEXT showed more bending and file displacement than those showed by WaveOne file. |
URI: | http://tailieuso.tlu.edu.vn/handle/DHTL/11047 |
Nguồn trực tuyến: | https://bnrc.springeropen.com/articles/10.1186/s42269-019-0183-x |
ISSN : | 2522-8307 |
Trong bộ sưu tập: | Tài liệu mở |
XEM MÔ TẢ
12
XEM & TẢI
0
Danh sách tệp tin đính kèm:
Hiện tại không có tệp tin đính kèm tới tài liệu.
Bạn đọc là cán bộ, giáo viên, sinh viên của Trường Đại học Thuỷ Lợi cần đăng nhập để Xem trực tuyến/Tải về
Khi sử dụng tài liệu trong thư viện số bạn đọc phải tuân thủ đầy đủ luật bản quyền.