Thông tin tài liệu
Nhan đề : | Evaluation of stress distribution in nickel-titanium rotary instruments with different geometrical designs subjected to bending and torsional load: a finite element study |
Tác giả: | Galal, Manar |
Người tham gia: | Hamdy, Tamer M. |
Năm xuất bản : | 2020 |
Số tùng thư/báo cáo: | Bulletin of the National Research Centre, Volume 44 (2020), Article number: 121 |
Tóm tắt : | No single geometrical design could be beneficial for all stress conditions. To decrease the stress accumulation during bending of rotary files in curved root canals, the rotary NiTi instruments should be designed with rectangle cross-section configuration, low pitch, reduced taper, and with centered cross section. This design improved the flexibility of rotary NiTi instruments. However, to improve the torsional resistance during root canal preparation of narrow canals, the file should be designed with parallelogram cross-sectional configuration, low pitch, increased taper, and eccentric cross-section design. |
URI: | http://tailieuso.tlu.edu.vn/handle/DHTL/11621 |
Nguồn trực tuyến: | https://bnrc.springeropen.com/articles/10.1186/s42269-020-00377-x |
ISSN : | 2522-8307 |
Trong bộ sưu tập: | Tài liệu mở |
XEM MÔ TẢ
10
XEM & TẢI
0
Danh sách tệp tin đính kèm:
Hiện tại không có tệp tin đính kèm tới tài liệu.
Bạn đọc là cán bộ, giáo viên, sinh viên của Trường Đại học Thuỷ Lợi cần đăng nhập để Xem trực tuyến/Tải về
Khi sử dụng tài liệu trong thư viện số bạn đọc phải tuân thủ đầy đủ luật bản quyền.