2023 (73)



Bạn muốn nhận thông báo về tài liệu mới của bộ sưu tập qua email?

Danh sách tài liệu trong bộ sưu tập

Danh sách tài liệu trong bộ sưu tập (Sắp xếp theo "Ngày nhập " với thứ tự "Giảm dần "): Hiển thị 1-20 trong tổng số 73 tài liệu

  • BB


  • Tác giả: Nguyen Manh Hung;  Người hướng dẫn: -;  Người tham gia: Nguyen Van Nghia; Luong Duy Thanh (2023)

  • The streaming potential that originates from water flow in porous media plays an important role in geophysical applications since it is sensitive to groundwater flow. In this work, we develop a physically-based model for the streaming potential in porous media using a bundle of capillary tubes model. The model is expressed in terms of microstructure properties, fluid properties and physicochemical properties at the fluid-solid interfaces. Additionally, we obtain an expression for the characteristic length scale as a function of microstructure properties. The model is successfully validated by comparisons with 12 samples of uniform glass bead available in literature. The model proposes...

  • BB


  • Tác giả: Nguyen Thanh Hoa;  Người hướng dẫn: -;  Người tham gia: Nguyen Thi Phuong; Nguyen Thi Lien (2023)

  • The study indicates efficiency of antibiotics: Amoxicillin (AMX) and ciprofloxacin (CIP) removal in hospital wastewater using H2O2/S2O82-/ZVI process. Application of Box – Behnken design was to determine the experiment's effects on COD removal. Effect of pH, H2O2, S2O82-, ZVI and reaction time as independent variables in batch oxidation experiments, namely quadratic response. The predicted value of COD removal at optimum conditions (pH=5, [H2O2]=14.90 µg/L, [S2O82-]=50 mg/L, ZVI=40 mg/L and reaction times: 42.92 min) were 84.97%±1.6%. The AMX and CIP removal efficiencies were 99.95% and 99.90% within 42.92 minutes, while 47.60% COD occurred within 120 minutes. As a consequence, H2O2/S...

  • BB


  • Tác giả: Pham Thi Hong;  Người hướng dẫn: -;  Người tham gia: Hoang Bao Linh; Nguyen Thuy Duong; Le Thi Thanh Tra (2023)

  • Our investigation delved into the direct and cross-generational impacts of very low copper concentration (50 µg/l) on the F0 and F1 generations of the common tropical copepod Eucyclops euacanthus under not extreme temperatures (24, 28, and 30 °C). In the F0 generation, Cu exposure did not alter the life cycle period of the copepod at 24 and 28°C, but an extension was observed at 30 °C. This lengthening of the life cycle at 30 °C in F0 copepods indicates a heightened energetic demand. In the F1 generation, the life cycle period was elevated in Cu-exposed F0 and at 34 °C. Notably, eggs from Cu-exposed F1 copepods at 30 °C failed to hatch successfully. These findings underscore the high ...

  • BB


  • Tác giả: Nguyen Thu Hang;  Người hướng dẫn: -;  Người tham gia: - (2023)

  • The Bac Hung Hai Irrigation System (BHH IS) is a crucial component of Vietnam's agricultural sector, providing irrigation for various crops, livestock, aquaculture, and domestic activities. This is primarily due to capacity limitations, inadequate infrastructure, and decentralization of water management. This study conducted a survey, collected and analyzed data to identify the water pollution problem and the situation of the operation and management of the Bac Hung Hai irrigation system. From literature review and water polution management practices from other countries with similar conditions, IoT solution and proposed main system for implementing real-time observation and controlli...

  • BB


  • Tác giả: Nguyen Thi Van;  Người hướng dẫn: -;  Người tham gia: - (2023)

  • In this article, we shall study the Keller-Segel system on a real hyperbolic space which is one class of Riemannian manifolds with Ricci curvature . We prove the existence, uniqueness of asymptotically almost periodic solutions for the linear equations by using dispersive and smoothing properties of the heat semigroup.

  • BB


  • Tác giả: Nguyen Cam Van;  Người hướng dẫn: -;  Người tham gia: Dinh Viet Tu; Van Ngoc An; Dinh Nhat Quang (2023)

  • Efficient water resource management is a critical mandate for governmental authorities, as it directly impacts the effective utilization of this invaluable natural resource. The expeditious and accurate extraction of water surfaces significantly impacts governmental decision-making. Leveraging the advanced capabilities of high-resolution satellite imagery and the precise orbital data return, this study employs state-of-the-art deep learning techniques to enhance the efficiency of water surface detection. Specifically, Sentinel-1 data acquired from Google Earth Engine is utilized as a primary input for proposed machine-learning models. With the satellite images covering the entire of Q...

  • BB


  • Tác giả: Nguyen Tuan Thanh Le;  Người hướng dẫn: -;  Người tham gia: Tran Anh Dat; Bui Quoc Bao; Pham Linh Manh (2023)

  • The problem of reducing traffic congestion on highways is one of the conundrums that the transport industry as well as the government would like to solve. With the great development of high technologies, especially in the fields of deep learning and reinforcement learning, the system using multi-agent deep reinforcement learning (MADRL) has become an effective method to solve this problem. MADRL is a method that combines reinforcement learning and multi-agent modeling and simulation approaches. In this article, we apply the Double Deep Q-Network (DDQN) algorithm to a multi-agent model of traffic congestion and compare it with two other algorithms.

  • BB


  • Tác giả: Ngo Tri Thuong;  Người hướng dẫn: -;  Người tham gia: Phan Cong Bang (2023)

  • The superior mechanical characteristics of ultra-high-performance fiber-reinforced concrete (UHPFRC) hold great potential for application in structures subjected to extreme loads, such as impacts or blasts. However, the practical application of this material in engineering is limited due to a lack of information about its mechanical properties, especially at high strain rates. In this study, the shear behavior of UHPFRC was investigated using a novel shear test setup installed in the universal testing machine (UTM) for static tests and the improved-strain energy frame impact machine (I-SEFIM) for high strain rate tests, respectively. Additionally, effect of fiber volume contents and t...

  • BB


  • Tác giả: Nguyen Dang Quy;  Người hướng dẫn: -;  Người tham gia: Vu Ngoc Tuan; Nguyen Truong Sinh; Vu Van Tan (2023)

  • The paper discusses the movement of a quarter-car concerning whether the tires are in contact with the road or not. A set of equations is formulated to highlight the two different states, and a new approach is presented to solve these equations while also considering the separation of the tires. A comparison between the new and old models shows that previous studies lacking this consideration must be reevaluated. A simulation is conducted to demonstrate how the characteristics of the road and suspension affect vertical displacement. Ultimately, this research provides more accurate outcomes that can be used to inform future suspension design.

  • BB


  • Tác giả: Vu Huy Cong;  Người hướng dẫn: -;  Người tham gia: - (2023)

  • The results showed that when the number of cylinders increases per unit area, the total drag coefficient increases but the average drag coefficient per cylinder decreases. A functional relationship between the drag coefficient and the density of cylinders was determined. The distribution or position of the cylinders has a considerable impact on particle distribution. The cylinders in the staggered arrangement disperse the particles more in a fan-shaped manner, spreading them out in the cylinder array. The results will advance knowledge of the drag force and flow field, particularly in matter propagation or dispersion through systems of objects.

  • BB


  • Tác giả: Nguyen Van Dung;  Người hướng dẫn: -;  Người tham gia: Mai Thi Hong; Nguyen Thi Thanh; Nguyen Vu Linh (2023)

  • This paper aims to study the effect of coal bottom ash (CBA) as a fine aggregate substitution at high levels on the mechanical properties and microstructure characteristics of concrete. CBA that sourced from a local coal-fired power plant in Vietnam was used to replace the natural sand (NS) in the concrete mixtures at different levels of 0, 30, 50, 70, and 100%. The concrete samples were prepared in the laboratory and checked for properties through the tests of compressive strength (CS), ultrasonic pulse velocity (UPV), water absorption (WA), porosity, electrical surface resistivity (ESR), and thermal conductivity (TC).

  • BB


  • Tác giả: Nguyen Viet Duc;  Người hướng dẫn: -;  Người tham gia: - (2023)

  • This paper presents the mechanical behavior of functionally-graded concrete (FGC) beam under flexural bending. The FGC beam was made of conventional concrete of strength class 30MPa with a thickness of 45mm and high performance glass fiber reinforced concrete (HPGFRC) of strength class 60MPa with thickness of 15mm. While the reference beam is composed of entirely conventional concrete of strength class 30MPa with thickness of 60mm. Both of the beams were reinforced by using two steel bars at the bottom with a concrete cover of 25 mm. Based on the third-point bending test, both the reference and FGC beam behaved in a similar manner, even though the latter consists of two layers of conv...

  • BB


  • Tác giả: Trần Tuấn Thạch;  Người hướng dẫn: -;  Người tham gia: Trần Quốc Lập (2023)

  • Nghiên cứu này tập trung vào xác định, phân tích sự biến đổi nhu cầu nước hiện tại và trong tương lai. Sự thay đổi về mưa và nhiệt độ được tính toán dựa trên mô hình dự báo khí tượng toàn cầu của bộ mô hình CMIP6 cho giai đọan 2040-2059, bao gồm: ACCESS-CM2; GFDL-ESM4; MIROC6 với hai kịch bản SSP2-4.5 và SSP5-8.5. Dữ liệu dự báo khí hậu được sử dụng để xác định nhu cầu nước cho lúa vụ Đông Xuân và được so sánh với giai đoạn nền 1990-2009. Kết quả tính toán nhu cầu nước theo các kịch bản cho thấy: 1) Nhu cầu cấp nước tưới giai đoạn 2040-2059 thay đổi từ -8%÷5% so với giai đoạn nền; 2) Nhu cầu nước được tính dựa trên mô hình dự báo ACCESS-CM2 với kịch bản SSP2-4.5 là lớn nhất (tăng 5% s...

  • BB


  • Tác giả: Trương Đức Toàn;  Người hướng dẫn: -;  Người tham gia: - (2023)

  • Bài báo này xem xét khía cạnh hiệu quả về mặt chi phí của hiện đại hóa hệ thống thủy lợi trên góc độ của người sử dụng nước cho sản xuất nông nghiệp. Kết quả nghiên cứu cho thấy chi phí mà người dân phải chịu giảm xuống so với trước khi hệ thống được hiện đại hóa, góp phần gia tăng hiệu quả sản xuất nông nghiệp nhờ tưới. Kết quả của nghiên cứu hàm ý rằng hiện đại hóa hệ thống thủy lợi sẽ đạt được sự đồng thuận cao khi góp phần nâng cao hiệu quả trong sản xuất nông nghiệp của người dân và góp phần phát triển nông nghiệp bền vững ở nước ta trong tương lai.

  • BB


  • Tác giả: Nguyễn Trung Kiên;  Người hướng dẫn: -;  Người tham gia: Trịnh Xuân Phong (2023)

  • Bài báo trình bày kết quả nghiên cứu ảnh hưởng của áp suất tăng áp đến hiệu suất và tính năng phát thải của động cơ khí sinh học khi trang bị bộ tăng áp. Phần mềm mô phỏng là phần mềm AVL Boost, động cơ nghiên cứu là động cơ diesel Isuzu 4JA1 trang bị cho máy phát điện tại các trang trại. Kết quả nghiên cứu cho thấy rằng: khi cải tạo động cơ diesel thành động cơ khí sinh học có trang bị bộ tăng áp. Nếu động cơ làm việc ở tốc độ 1500 v/p, áp suất tăng áp 1,5 bar thì công suất động cơ khí sinh học có tăng áp tăng thêm được 2kW so với động cơ diesel nguyên thủy. Ngoài ra khi động cơ làm việc trong vùng tải trọng từ 5kW đến 22kW, phát thải của động cơ khí sinh học có trang bị tăng áp giảm...

  • BB


  • Tác giả: Phạm Nguyệt Ánh;  Người hướng dẫn: -;  Người tham gia: Nguyễn Thị Liên; Nguyễn Thị Lan Hương (2023)

  • Nghiên cứu này nhằm đánh giá khả năng tái chế thành phân hữu cơ của bùn sinh học từ quá trình xử lý nước thải chế biến sữa bằng bùn hoạt tính hiếu khí có bổ sung chế phẩm CMs. Kết quả cho thấy, bùn có pH trung tính, độ ẩm cao (99%). Hàm lượng chất hữu cơ tổng số (2,25 mg/kg), tổng nitơ (2.932 mg/kg), và tổng photpho (509 mg/kg) đều ở mức thấp nhưng tổng kali tương đối cao (5.559 mg/kg). Hàm lượng kim loại nặng Cu, Zn, Cd, Pb, Ni, Hg và một số thành phần nguy hại như Cr6+, tổng xyanua đều dưới ngưỡng cho phép của QCVN 50:2013/BTNMT của Bộ Tài nguyên và môi trường và Thông tư 41/2014/TT-BNTPTNT của Bộ Nông nghiệp và Phát triển nông thôn. Không phát hiện thấy E. Coli và Salmonella trong ...

  • BB


  • Tác giả: Ngô Văn Thuyết;  Người hướng dẫn: -;  Người tham gia: - (2023)

  • Trong nghiên cứu này, ảnh hưởng của các đặc trưng của chuyển động nền trận động đất đến phản ứng của một công trình dân dụng nhà khung bê tông cốt thép 5 tầng được khảo sát bằng phân tích mô hình số. Kết quả cho thấy phản ứng của công trình càng lớn khi đỉnh gia tốc nền càng lớn, bước thời gian và tổng thời gian dao động của chuyển động nền càng dài.

  • BB


  • Tác giả: Nguyễn Thị Hằng Nga;  Người hướng dẫn: -;  Người tham gia: Bạch Văn Toàn; Trần Quang Dinh; Lê Quang Khải (2023)

  • Trong nghiên cứu này, ảnh hưởng của các đặc trưng của chuyển động nền trận động đất đến phản ứng của một công trình dân dụng nhà khung bê tông cốt thép 5 tầng được khảo sát bằng phân tích mô hình số. Kết quả cho thấy phản ứng của công trình càng lớn khi đỉnh gia tốc nền càng lớn, bước thời gian và tổng thời gian dao động của chuyển động nền càng dài.

  • BB


  • Tác giả: Nguyễn Thái Hoàng;  Người hướng dẫn: -;  Người tham gia: Hoàng Đình Trí (2023)

  • Trong khuôn khổ bài báo này nhóm tác giả sẽ trình bày ba vấn đề và phương pháp giải quyết ba vấn đề: Phương pháp thông số ban đầu dùng để xác định chuyển vị của dầm có nhiều ưu điểm. Ưu điểm thứ nhất là có thể áp dụng cho dầm có ít hay nhiều đoạn thanh, ưu điểm thứ hai là có thể xác định cả chuyển vị và nội lực của dầm tĩnh định cũng như siêu tĩnh. Tuy nhiên hiện nay phương pháp thông số ban đầu được trình bày trong các giáo trình Sức bền vật liệu còn có một số vấn đề cần trao đổi thêm cho hợp lý.