Thông tin tài liệu
Nhan đề : | Optimization of steel moment frames with panel-zone design using an adaptive differential evolution |
Tác giả: | Truong, Viet Hung |
Người tham gia: | Ha, Manh Hung Pham, Hoang Anh Tran, Duc Hoc |
Năm xuất bản : | 2019 |
Số tùng thư/báo cáo: | Journal of Science and Technology in Civil Engineering NUCE 2020, Vol 14, No 2, pp.65–75; https://doi.org/10.31814/stce.nuce2020-14(2)-06 |
Tóm tắt : | Optimization of steel moment frames has been widely studied in the literature without considering shear deformation of panel-zones which is well-known to decrease the load-carrying capacity and increase the drift of structures. In this paper, a robust method for optimizing steel moment frames is developed in which the panelzone design is considered by using doubler plates. The objective function is the total cost of beams, columns, and panel-zone reinforcement. The strength and serviceability constraints are evaluated by using a direct design method to capture the nonlinear inelastic behaviors of the structure. An adaptive differential evolution algorithm is developed for this optimization problem. The new algorithm is featured by a self-adaptive mutation strategy based on the p-best method to enhance the balance between global and local searches. A five-bay five-story steel moment frame subjected to several load combinations is studied to demonstrate the efficiency of the proposed method. The numerical results also show that panel-zone design should be included in the optimization process to yield more reasonable optimum designs. |
URI: | http://tailieuso.tlu.edu.vn/handle/DHTL/9002 |
ISSN : | 1859-2996 |
Trong bộ sưu tập: | Các bài báo của GV Trường ĐHTL |
XEM MÔ TẢ
12
XEM & TẢI
2
Danh sách tệp tin đính kèm:
Bạn đọc là cán bộ, giáo viên, sinh viên của Trường Đại học Thuỷ Lợi cần đăng nhập để Xem trực tuyến/Tải về
Khi sử dụng tài liệu trong thư viện số bạn đọc phải tuân thủ đầy đủ luật bản quyền.